Although not used in any other pt boat design, huckins licensed the use of his patented quadraconic hull in his pt boat construction. he also granted permission for elco, higgins, and the philadelphia navy yard to use his patented laminated keel, which increased hull strength, although neither elco nor higgins ever chose to use it on their boats.. The hull can be sealed using the age-old tissue-and-dope or fiberglass/epoxy. finished, the rc pt boat will measure about 30 inches long and eight inches wide (760 by 200mm) and weigh about three pounds (1.5kg). the pc pt boat plan is intended for a single mabuchi rs-540 rc motor, or similar for simplicity and good economy.. Their diesel engines provided a range of 700 to 750 nmi (810–860 mi; 1,300–1,390 km), substantially greater than the gasoline-fueled american pt boats and british motor torpedo boats (mtbs). as a result, the royal navy later developed better-matched mtbs, using the fairmile 'd' hull design..
Pt boat & vietnam era boat plans coastal forces plans. we carry a selection of pt boats plans from coastal forces. these plans are large scale and very detailed. the below listed plans are in 1/32 scale.. The following pitch and diameter information is based on pt historian andy small's research. his research shows that elco 80' boats were equipped with 28" diameter propellers until pt 613 (direct drive boats) which used 29" diameter propellers. pitch = inches traveled per revolution (with no slip) and relates to the blades angle to the hub.. Design-wise, the higgins boat managed a rather conventional appearance and layout. often confused with the elco and huckins boats they competed with, and operated alongside, higgins boats were clearly distinguished by their well-forward set cockpit superstructures aft of a short forecastle. additionally, the hulls of the american pt boats.
0 komentar:
Posting Komentar